Standing Seam Panels

Standing seam panels offer several benefits that make them a popular choice for roofing and siding. Here are some of the key advantages:

Durability: Standing seam panels are known for their durability. They can withstand harsh weather conditions, including high winds, heavy snow, and hail.

Leak Prevention: The design of standing seam panels, with their raised interlocking seams, helps to prevent water penetration, making them an excellent choice for areas with heavy rainfall or snow.

Aesthetics: Standing seam panels offer a clean, modern look that can enhance the aesthetic appeal of a building. They come in a variety of colors and finishes, allowing for a high degree of customization.

Energy Efficiency: Metal panels, including standing seam panels, reflect solar radiant heat, which can help to reduce cooling costs in hot climates.

Low Maintenance: Standing seam panels require minimal maintenance compared to other roofing and siding materials. They do not need to be cleaned as often, and they do not rot, crack, or corrode.

Longevity: With proper installation and maintenance, standing seam panels can last for several decades, making them a cost-effective choice in the long run.

Fire Resistance: Metal panels are noncombustible and won't ignite when exposed to high temperatures or flying sparks, providing an added layer of protection for the building.

The lifespan of standing seam panels can vary depending on the quality of the materials used, the quality of the installation, the level of maintenance, and the weather conditions where the building is located.

However, generally speaking, standing seam panels are known for their longevity. With proper maintenance, they can often last for several decades. The metal used in these panels is typically resistant to many of the factors that can cause wear and tear in other types of roofing, such as pests, rot, and fire.

Yes, standing seam panels can be very energy efficient. Their reflective properties, tight seams, insulation, and longevity make them a far superior building material compared to standard asphalt shingles or plank siding.

Yes, standing seam panels can indeed be used for siding. While they are most commonly used for roofing, their durability, aesthetic appeal, and ease of maintenance make them a good choice for siding as well.

The terms 24 gauge and 26 gauge refer to the thickness of the metal used in the panels. The gauge number is inversely proportional to the metal's thickness, meaning the lower the gauge number, the thicker the metal.

So, a 24 gauge panel is thicker than a 26 gauge panel. Here's what that means in practical terms:

Strength and Durability: Because 24 gauge panels are thicker, they tend to be stronger and more durable than 26 gauge panels. They may be more resistant to denting and other forms of damage.

Weight: 24 gauge panels are heavier than 26 gauge panels due to the increased thickness of the metal.

Application: 24 gauge panels are often used in commercial or industrial settings or in areas with severe weather conditions due to their increased strength and durability. 26 gauge panels, while still quite durable, are often used in residential or light commercial applications.

It's important to note that both 24 gauge and 26 gauge panels can provide excellent performance and longevity. The best choice depends on the specific requirements of your project and the conditions in your area.

Standing seam panels are versatile and suitable for a wide range of building types due to their durability, aesthetic appeal, and energy efficiency.